Spring load tester WG-1

The tester WG 1 has two guides with 4 bearings. Maximum test length is 120 mm. The movement of the testplates is manual with a lever and has an additional fine adjustment screw. Two length stops can be set up for batch test of springs.The tester has a 10 N load cell. The length display is on a digital vernier with data output and has a resolution of 0,01 mm. For compress springs the maximum length is 120 mm. The testplates have a diameter of 30 mm and are adjustable in parallelity. Maximum measured value memory is built in.
Dataoutput RS 232
Options: test on rod, parallel data output.

Load range: 0-10 N
Resolution:
0,0001 N

Spring load tester WG-3/2

The tester WG 3/2 has two guides with 4 bearings. The movement of the testplates is manual with a lever and has an additional fine adjustment screw. Two length stops can be set up for batch tests of springs. The tester has a RS 232 data output to give the load values to a PC or SPC system.The tester is available with a large variety of load cells: 10 N, 50 N, 100 N, 200 N, 500 N. The length display is on a digital vernier with data output and has a resolution of 0.01 mm. For compress springs the maximum length is 100 mm and for tension springs the maximum length is 150 mm. The testplates have a diameter of 45 mm and are adjustable in parallelity.

Available ranges:

Loadrange: 100 Newton Resolution 200 Newton Resolution
Loadrange 1: 0 - 2 N 0,001 N 0 - 2 N 0,002 N
Loadrange 2: 0 -20 N 0,01 N 0 -20 N 0,01 N
Loadrange 3: 0 - 100 N 0.1 N 0 - 200 N 0,1 N





Also available with other load cells for example 0 - 10 N, 0 - 50 N, 0 - 500 N

Spring load tester WG-3/3

The tester WG 3/3 has two guides with 4 bearings. The movement of the testplates is manual with a lever and has an additional fine adjustment screw. Two length stops can be set up for batch tests of springs. The tester has a RS 232 data output to give the load values to a PC or SPC system.The tester is available with a large variety of load cells: 10 N, 50 N, 100 N, 200 N, 500 N. The length measurement is based on a optical ruler system which is displayed digital with a resolution of 0.01 mm. For compress springs the maximum length is 100 mm and for tension springs the maximum length is 150 mm. The testplates have a diameter of 45 mm and are adjustable in parallelity.

Available ranges:

Loadrange: 100 Newton Resolution 200 Newton Resolution
Loadrange 1: 0 - 2 N 0,001 N 0 - 2 N 0,002 N
Loadrange 2: 0 -20 N 0,01 N 0 -20 N 0,01 N
Loadrange 3: 0 - 100 N 0.1 N 0 - 200 N 0,1 N





Also available with other load cells for example 0 - 10 N, 0 - 50 N, 0 - 500 N

Spring load tester WG-4/2

The tester WG 4/2 has two guides with 4 bearings. The movement of the testplates is manual with a lever and has an additional fine adjustment screw. Two length stops can be set up for batch tests of springs. The tester has a RS 232 data output to give the load values to a PC or SPC system.The tester is available with a large variety of load cells: 100 N, 200 N, 500 N. The length display is on a digital vernier with data output and has a resolution of 0.01 mm. For compress springs the maximum length is 250 mm and for tension springs the maximum length is 300 mm. The testplates have a diameter of 50 mm and are adjustable in parallelity.

Available ranges:

Loadrange: 100 Newton Resolution 200 Newton Resolution
Loadrange 1: 0 - 2 N 0,001 N 0 - 2 N 0,002 N
Loadrange 2: 0 -20 N 0,01 N 0 -20 N 0,01 N
Loadrange 3: 0 - 100 N 0.1 N 0 - 200 N 0,1 N





Also available with other load cells for example 500 N

Spring load tester WG-4/3

The tester WG 4/3 has two guides with 4 bearings. The movement of the testplates is manual with a lever and has an additional fine adjustment screw. Two length stops can be set up for batch tests of springs. The tester has a RS 232 data output to give the load values to a PC or SPC system.The tester is available with a large variety of load cells: 100 N, 200 N, 500 N. The length measurement is based on a optical ruler system which is displayed digital with a resolution of 0.01 mm. For compress springs the maximum length is 250 mm and for tension springs the maximum length is 300 mm. The testplates have a diameter of 50 mm and are adjustable in parallelity.

Available ranges:

Loadrange: 100 Newton Resolution 200 Newton Resolution
Loadrange 1: 0 - 2 N 0,001 N 0 - 2 N 0,002 N
Loadrange 2: 0 -20 N 0,01 N 0 -20 N 0,01 N
Loadrange 3: 0 - 100 N 0.1 N 0 - 200 N 0,1 N

Also available with other load cells for example 500 N

Spring load tester WG-5/3

The tester is a desktop modell for checking compression and tension springs. Hooks for testing tension springs are available in different diameters. The movable upper testplate is guided by two columns. The movement is performed by tow precision ballscrews and a Handwheel. The upper testplate can be changed and replaced by a drilled testplate for testind long, slender spring on a rod. The testplate have a diameter of 95 mm. Testplate for testing on a rod can be manufatured on your demands. The length is measuresd by an incremental decoder with a resolution of 0.01 mm. For tension springs there is a possibility to preset the length for setup with a gauge. The tester has a RS 232 data-output for the load for connecting it to a PC.

Max. length comp.springs 635mm
Max. length tension springs 550mm


Available ranges:

Loadrange: 1 KN
Resolution 2 KN Resolution 5 KN Resolution
Loadrange 1: 0 - 20 N 0,01 N 0 - 20 N 0,02 N 0 - 500 N 0,1 N
Loadrange 2: 0 -200 N 0,1 N 0 -200 N 0,1 N 0 - 5 KN 1 N
Loadrange 3: 0 - 1 KN 1 N 0 - 2 KN 1 N


other ranges on request